Table of Contents
Advertisement
To zoom continuously:
1.
Select a Speed, with higher numbers representing faster
speeds.
2.
Click and hold the Continuous Zooming buttons for zooming
in or out.
To zoom in steps:
1.
Enter the desired Step Size.
3.
Click the Stepped Zooming buttons one click at a time to zoom in
by the set Step Size per click.
After adjusting the camera, it is recommended to adjust the Focus
Control for optimal video quality.
Auto Refocus after Zoom: this option will automatically adjust the
camera focus after zooming.
Manual: select this option to manually adjust the camera focus. This
option is useful if the autofocus option is not the desired position.
Preset positions are user defined camera positions that can be zoomed
in on. A series of these points can be grouped together as a Tour.
To create a present position:
1.
Click the Edit icon
wish to configure.
2.
Type a Name for the position.
3.
Pan, tilt, and zoom on the area until you have the desired
camera angle and focus.
4.
Once completed, click the Edit icon
complete the preset position configuration.
26
next to the position number you
again to
5.
To create more preset positions, repeat steps 1-4 as needed.
The Go-to-Preset icon
once it has been designated. The Delete icon
the preset position.
will take you to the preset position
will delete
Advertisement
Table of Contents
