33023AA
Use the Pan Tilt controls to navigate the camera to the desired position
Home Position
and then click the Apply button to designate the camera's current
position as the Home Position.
Command Protocol
Pan & Tilt controls
If the camera needs to be used with third party devices, the camera
supports Serial Hex Command as a low level PT command set. Select
Directional Controls
the PTZ Vender/ Protocol to use and the address. Otherwise, leave
default settings.
Movement Speed
Use the Directional Controls to pan/tilt the PTZ camera.
Auto Pan/Tilt Speed: when enabled, the camera will automatically set
the pan/tilt speed according to the zoom ration and selected pan/tilt
speed while also maintaining clarify and quality of image.
Movement Speed: when auto pan/tilt speed is disabled, the camera will
follow the value set in the Pan/Tilt Speed field. Higher numbers
Zoom Controls
represent faster speeds.
Focus Controls
Preset Positions List
25