Table of Contents
Advertisement
5.
Attach the gland body to the Ethernet port of the camera.
Ensure the rubber ring is completely aligned and flat on the
gland body to prevent water leakage.
20
Camera Ethernet
connection
6.
Connect the Ethernet cable to the Ethernet port of the camera.
7.
Insert the sealing rubber into the conduit gland body.
8.
Tightly attach the clamping nut to the conduit gland body.
9.
Arrange all unused camera cables and wrap them in waterproof
tape.
Different applications and installation environments require
different types of waterproof methods that may not be covered
in this manual. Check your installation environment and adapt
a suitable waterproof mehod.
If the camera is installed outdoors and the bundled power
adapter is used, be sure to protect if from different
environmental factors. It is reccommended to place the power
adapter indoors or housed inside a junction box.
Advertisement
Table of Contents
