Table of Contents
Advertisement
Video Loss: this is available for video servers only. When analog video
is lost it will trigger an event.
Switch to Night Mode: when the camera changes between day and
night modes, an event can be triggered.
Device Boot or Reboot: an event can be triggered when the camera
boots or reboots.
Storage: if storage space runs out or if writing to storage fails, or if the
microSD card is suddenly removed from the camera.
To configure triggers:
1.
Use the drop-down menu to choose a Triggered by category.
2.
If needed, choose a Region.
3.
Designate a response to the event.
33023AA
You can set any event rule as a manual event. The manual event will
display in the live screen as the Trigger button, which can be clicked to
trigger an event and response.
To set a manual event:
1.
Us the drop-down menu to select an Event Rule.
2.
Click Apply.
39
Advertisement
Table of Contents
