avertX HD510 User Manual page 13

Use the included IP Utility software to easily find your network cameras
for initial setup. The IP Utility software is included on the software CD
with your camera.
The HD510 PTZ camera is DHCP compatible, meaning it can be
assigned an IP address from a DHCP server automatically when
connected to the network for the first time. This is ideal for setup that
requires an indirect connection between the camera and recorder,
usually for network security or installation considerations.
Use the IP Utility software to configure your IP cameras if you are not
using Plug N' Play as a direct connection to your AvertX recorder.
1. Open the Software CD on your PC and install the IP Utility.
2. In the IP Utility, identify your IP camera(s) by IP address or model.
Only cameras connected to the network will show up in the IP
Utility camera list.
1. Click the check box next to the selected camera, and then click
Change Network Address to modify the IP address of the camera.
2. In the pop-up window, select Static IP Address, and then modify
the Starting IP Address.
33023AA
3. Click Apply.
4. Click Refresh in the IP Utility to view the IP camera's new IP
address.
The camera is set to DHCP by default. The IP addres is
assigned by the router.
You can check the box next to multiple cameras to change the
IP addresses sequencially.
The Administrator account has the authority to configure the IP camera
and authorize users' access to the camera. The User accounts have
access to the camera with limited authority.
The username and password are case sensitive. It is strongly
recommended that the password be changed after the initial setup to
prevent unauthorized access.
Username – admin
Password – 1234
The Mighty Squirrel Contr ol
13