For waterproof cable using the cable gland, you will need:
Cable gland (included)
Gland rubber ring (included)
Exterior grade Ethernet cable (not included)
Waterproof tape (not included)
1.
Disassemble the conduit gland.
Gland Body
Gland Body
Sealing Rubber
10. Slide the clamping nut onto the Ethernet cable.
11. Insert the Ethernet cable through the sealing rubber.
12. Attach one rubber ring (included) on the gland body.
33023AA
Clamping Nut
13. Attach the gland body to the Ethernet port of the camera.
Camera Ethernet
connection
21