Autofocusing The Infrared Camera; Figure; Procedure; Continuous Autofocus - FLIR T6 series User Manual

13 Handling the camera
Note
• Do not touch the lens surface when you adjust the infrared camera focus manually. If this happens,
clean the lens according to the instructions in 27.2 Infrared lens, page 260.
• The focus ring can be rotated infinitely, but only a certain amount of rotation is needed when
focusing.

13.7 Autofocusing the infrared camera

13.7.1 Figure

13.7.2 Procedure

Follow this procedure:
1. To autofocus the camera when continuos autofocus is disabled, push the Autofocus/
Save button half-way down.

13.8 Continuous autofocus

13.8.1 General

The camera can be set up to perform continuous autofocusing. In this mode, the digital
camera is used, meaning that continuous autofocus will not work in darkness.
13.8.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
3. Push the joystick to display the Settings menu.
4. Select Device settings and push the joystick.
5. Select Set up camera and push the joystick.
6. Select Continuous autofocus. If the check box is unchecked, push the joystick to ena-
ble continuous autofocus.
7. Aim the camera toward the object of interest. The camera will now continuously
autofocus.
#T559880; r.15724/15724; en-US
(Settings).
26