Quick Guide To The Camera; New Camera; Turn The Camera On/Off; Menu System - FLIR EST Series User Manual

6

Quick guide to the camera

6.1 New camera

If you have a new camera, do the following:
1. Charge the battery for 2 hours (FLIR Exx-EST and FLIR Exx) / 3 hours (FLIR T5xx-
EST and FLIR T5xx/T8xx) using the stand-alone battery charger.
2. Push the battery into the battery compartment.

6.2 Turn the camera on/off

• To turn on the camera, push the on/off button
• To turn off the camera, push and hold the on/off button

6.3 Menu system

The menu system gives access to the Settings menu and more.
To display the menu system, push the navigation pad or tap the menu system button
.
To navigate the menu system, you can use the navigation pad or tap the camera screen.

6.4 Adjusting the camera focus

You can adjust the camera focus by rotating the focus ring or by pushing the autofocus
button.
Adjusting the camera focus correctly is important for accurate temperature measure-
ments. This is described in more detail later in the manual.
Note The camera can also be set up to perform continuous autofocusing. When using
the camera for screening, the focus shall be adjusted manually and continuous focus
shall be disabled. For more information, see section 7.4 Prepare the camera.
Manual focus
Autofocus
#T810558; r. AC/68383/68383; en-US
.
FLIR Exx-EST
FLIR Exx
for more than 0.5 second.
FLIR T5xx-EST
FLIR T5xx/T8xx
11