Power And Sleep Settings; Quick Guide To Flir Screen Est; Start Application; User Interface - FLIR E Series User Manual

5
Setting up the screening station

5.4.2 Power and sleep settings

Change the computer's settings so it never automatically enters sleep mode or turns off
the display.

5.5 Quick guide to FLIR Screen EST

5.5.1 Start application

You start the FLIR Screen EST application from the Start menu or by double-clicking the
desktop icon.

5.5.2 User interface

The FLIR Screen EST application consists of two windows:
• The operator window is used by the operator for setup, control, and monitoring.
• The screening window is what the screened person sees.
The operator window has three pages:
• The Live page is where you connect to the camera and control the screening.
• On the Library page you can navigate to any saved images.
• The Settings page is used to change the settings.

5.5.3 Working principle

The system calculates a moving average temperature value based on a specified num-
ber of samples. Only temperatures between specified minimum and maximum tempera-
tures are included in the average calculation. Persons with an elevated temperature do
not contribute to the average calculation.
The system detects and measures the temperature of the hottest spot within a face de-
tection box. An alarm will trigger when the measured temperature is higher than the
alarm limit. The alarm limit is the sum of the average temperature and a specified allowed
deviation.
The face detection box is looking for faces in a part of the image which is called the re-
gion-of-interest. The size and position of the region-of-interest can be changed on the
Live page.

5.5.4 User manual

To access the FLIR Screen EST user manual, click Usre manual on the Library page or
go to https://support.flir.com/screenest.

5.6 Prepare the camera

Note Prepare the camera before you mount it. It can be difficult to do the necessary
settings when the camera is mounted.

5.6.1 New camera

If you have a brand new camera, do the following:
1. Charge the battery for 2 hours (FLIR Exx) / 3 hours (FLIR T5xx/T8xx) using the
stand-alone battery charger.
Note This is only needed if you want to use the camera without connecting it to the
computer using the USB cable with power adapter.
2. Push the battery into the battery compartment.
3. Open the cover at the top (FLIR Exx) / bottom (FLIR T5xx/T8xx) of the camera. Insert
the supplied memory card into the card slot.
#T810558; r. AB/67023/67023; en-US
12