Viewing The Recording On Tv - Sony DCR-TRV820 Service Manual

Playing back a tape
To view the picture at double speed
Press ×2 on the Remote Commander during
playback. For double speed playback in the
, then press ×2 on the
reverse direction, press
Remote Commander. To resume normal
playback, press N.
To view the picture frame-by-frame
Press C on the Remote Commander in the
playback pause mode. For frame-by-frame
playback in the reverse direction, press c. To
resume normal playback, press N.
To search the last scene recorded
(END SEARCH)
Press END SEARCH in the stop mode. The last 5
seconds of the recorded section plays back and
stops.
In the various playback modes
•Noise may appear when your camcorder plays
back tapes recorded in the Hi8/standard 8
system.
•Sound is muted.
•The previous recording may appear as a mosaic
image when playing back in the Digital8
system.
Notes on the playback pause mode
•When the playback pause mode lasts for 3
minutes, your camcorder automatically enters
the stop mode. To resume playback, press N.
•The previous recording may appear.
Slow playback for tapes recorded in the
Digital8 system
The slow playback can be performed smoothly
on your camcorder; however, this function does
not work for an output signal from the DV IN/
OUT jack.
When you play back a tape in reverse
Horizontal noise may appear at the center or top
and bottom of the screen. This is not a
malfunction.
40

Viewing the recording on TV

If your TV/VCR has a 21-pin
connector (EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to
obtain high-quality pictures. With this
connection, you do not need to connect the
yellow (video) plug of the A/V connecting cable.
Connect an S video cable (not supplied) to the S
video jacks on both your camcorder and the TV
or the VCR.
Using the AV cordless IR
receiver
Once you connect the AV cordless IR receiver
(not supplied) to your TV or VCR, you can easily
view the picture on your TV. For details, refer to
the operating instructions of the AV cordless IR
receiver.
S.LASER LINK
Super laser link emitter/
Излучатель лазерного суперканала
42
Воспроизведение ленты
Для просмотра воспроизведения
изображения на удвоенной скорости
×
×
N
Для покадрового просмотра
воспроизведения изображения
C
c
N
Для поиска последнего записанного
эпизода (END SEARCH)
В переменных режимах воспроизведения
Примечания по режиму воспроизведения
N
Замедленное воспроизведение для лент,
записанных в цифровой системе Digital8
При воспроизведении ленты в обратном
направлении
Просмотр записи на экране
телевизора
Если в Вашем телевизоре/КВМ
имеется 21-штырьковый разъем
(EUROCONNECTOR)
TV
Если в Вашем телевизоре или КВМ
имеется гнездо S видео
Использование беспроводного
ИК аудиовидеоприемника
Viewing the recording
on TV
Connect your camcorder to your TV or VCR with
the A/V connecting cable supplied with your
camcorder to watch the playback picture on the
TV screen. You can operate the playback control
buttons in the same way as when you monitor
playback pictures on the LCD screen. When
monitoring the playback picture on the TV
screen, we recommend that you power your
camcorder from the mains using the AC power
adaptor (p. 21). Refer to the operating
instructions of your TV or VCR.
Open the jack cover. Connect your camcorder to
the TV using the A/V connecting cable. Then, set
the TV/VCR selector on the TV to VCR.
S VIDEO
AUDIO / VIDEO
: Signal flow/
If your TV is already connected
to a VCR
Connect your camcorder to the LINE IN input on
the VCR by using the A/V connecting cable
supplied with your camcorder. Set the input
selector on the VCR to LINE.
If your TV or VCR is a monaural
type
Connect the yellow plug of the A/V connecting
cable to the video input jack and the white or the
red plug to the audio input jack on the VCR or
the TV. If you connect the white plug, the sound
is L (left) signal. If you connect the red plug, the
sound is R (right) signal.
Viewing the recording on TV
Before operation
Attach the power supply such as the AC power
adaptor to your camcorder, and insert the
recorded tape.
(1) After connecting your TV and AV cordless IR
receiver, set the POWER switch on the AV
cordless IR receiver to ON.
(2) Turn the TV on and set the TV/VCR selector
on the TV to VCR.
(3) Set the POWER switch on your camcorder to
VTR.
(4) Press S.LASER LINK. The lamp of S.LASER
LINK lights up.
(5) Press N on your camcorder to start playback.
(6) Point the super laser link emitter at the AV
cordless IR receiver. Adjust the position of
your camcorder and the AV cordless IR
receiver to obtain clear playback pictures.
To cancel the super laser link
function
Press S.LASER LINK. The lamp on the S.LASER
LINK button goes out.
If you turn the power off
Super laser link function turns off automatically.
When super laser link is activated (the
S.LASER LINK button is lit)
Your camcorder consumes power. Press S.LASER
LINK to turn off the super laser link function
when it is not needed.
is a trademark of Sony Corporation
1-9
Просмотр записи на
экране телевизора
IN
S VIDEO
VIDEO
AUDIO
Ecли Baш телевизор уже
подсоединен к КВМ
Если Ваш телевизор или КВМ
монофонического типа
Просмотр записи на экране
телевизора
Перед эксплуатацией
(1)
(2)
(3)
(4)
N
(5)
(6)
Для отмены функции лазерного
суперканала передачи сигналов
Если Вы выключите питание
При включенном лазерном суперканале
передачи сигналов (при этом
высвечивается кнопка S.LASER LINK)
41
43