Alignment Tape - Sony DCR-TRV820 Service Manual

3-1-5. Alignment Tape

The following table lists alignment tapes which are available.
Use the tape specified in the signal column for each adjustment. If
the type of tape to be used for checking operations is not speci-
fied, use whichever type.
Digital8 alignment tape
Name
SW/OL standard (WR5-2D) Switching position adjustment
Audio operation check
(WR5-3ND (NTSC),
WR5-3CD (PAL))
System operation check
(WR5-5ND (NTSC),
WR5-5CD (PAL))
Hi8/standard 8 mm alignment tape
Name
Tracking
(WR5-1NP (NTSC), WR5-1CP (PAL))
Video frequency characteristics
(WR5-7NE (NTSC), WR5-7CE(PAL))
Operation check
(WR5-5NSP (NTSC), WR5-5CSP (PAL))
Operation check
(WR5-8NSE (NTSC), WR5-8CSE (PAL))
Operation check
(WR5-4NL (NTSC), WR5-4CL (PAL))
Operation check
(WR5-8NLE (NTSC), WR5-8CLE (PAL)
AFM stereo operation check
WR5-9NS(NTSC), WR5-9CS(PAL)
BPF adjustment
WR5-11NS(NTSC), WR5-11CS(PAL)
Tape type
ME ........... Particle type metal tape
MP ........... Evaporated type metal tape
Usage
Audio system adjustment
Operation check
Recording
mode
Standard 8 mm
Hi8
Standard 8 mm
Hi8
Standard 8 mm
Hi8
Standard 8 mm
Standard 8 mm
Tape Tape
type speed
Tape path adjustment, Switching position
MP SP
adjustment
SP (NTSC)
ME Frequency characteristics adjustment
LP (PAL)
MP SP
ME SP
Operation check
MP LP
ME LP
MP SP AFM stereo Operation check
MP SP BPF adjustment
Table 5-3-2
5-39
Usage