Lamp On/Off (Lamp); Reset (Rese); Running Time (Lamp/Unit); Time - Elation power spot 575 User Manual

Power Spot 575™
several fixtures together at once to achieve a synchronized light show running to
sound in a Master/Slave configuration. To run in a Master/Slave.
Additionally you can choose a basic position for this audio chaser. Use either the
internal manual mode or an external DMX controller to set the desired Pan/Tilt
position. Confirm this setting in the
You can also set the size of the audio chaser in the
between: NORM (no basic position has to bee chosen), 'BIG', 'MIDL' and 'SMAL').
If you want to run several units in a Master/Slave system be sure designate your first
unit in the chain as the master. All others must be "Slave" Master = OFF. Notice:
The Audio function is only working if no DMX is connected.
3.4 Lamp On/Off
LAMP
This function allows you to manually control the lamp operation. Access the lamp
function in the main menu and use the use the Up and Down buttons to toggle
between lamp
the Mode button to cancel and return to the main menu. (The lamp
will only functions if and when the shutter is closed at the same time).
3.5 Reset
RESE
This function will rest and return all motors to the home position. Access the reset
function in the main menu and press the Enter button to engage the reset function
RST
( will readout in the display).

3.6 Running Time (lamp/unit)

TIME

This menu function will read out three different fixture running times.
POWR Fixture running time (non destructible). Total running time logged by the
©Elation Professionals® Los Angeles, Ca.
On and lamp Off.
menu by pressing the Enter button.
SVPT
SIZE
Press the Enter button to confirm the operation or
- wwww.ElationLighting.com
menu. You have the choice
OFF
command
- Page
19