Mounting An Accessory Lens - FLIR Exx Series User Manual

12 Handling the camera
3. Pull the transparent tape to lift out the battery.

12.6 Mounting an accessory lens

Follow this procedure:
1. Note the two indents on the front of the lens and the corresponding tabs on the lens
cap.
2. Use the lens cap from the accessory lens as a tool to remove the plastic front of the
lens. Rotate the plastic front 30° degrees counter-clockwise.
3. Note the index marks on the lens bayonet mount and on the replacement lens.
4. Carefully push the lens into position.
#T559845; r.15722/15722; en-US
24