Lens - FLIR X6520sc Series User Manual

6 Installing the camera
3. Place the provided protective cap on the camera, to avoid dust or water entering the
camera.
6.3.1.3 General
When detached, the LCD screen can be connected to the camera using the provided
right-angled USB extender cable. An additional USB cable can be added to extend the
length. The efficiency of operating the camera in this way is highly dependent on the
quality of the additional USB cable and the environment in which the camera is being
used.
The screen has been designed for ease of use on a workbench, as shown in the figure
below.
The screen automatically detects its orientation, and flips the interface accordingly. The
orientation can be locked in the ResearchIR Max camera user interface (see section
6.4.8 Advanced camera controls, page 25).

6.3.2 Lens

A large range of lenses is available for the FLIR X6520sc. The lenses feature a professio-
nal bayonet mount with a lock. Each lens is identified through the bayonet connector. A
temperature probe is also integrated into the lens. This probe is used by the camera to
compensate for thermal drifts.
Note FLIR is continuously extending its range of available optics. Contact your FLIR
sales representative for more information on newly available optics.
17
#T810207; r. AA/43061/43086; en-US