10
Pairing Bluetooth devices
10.1 General
You can use Bluetooth-enabled headsets, and Bluetooth-enabled Extech and FLIR me-
ters together with the camera. Before you can use the device with the camera, you need
to pair the camera and the device.
10.2 Procedure
Follow this procedure:
1. Enable Bluetooth on the device. See the user documentation for that device for infor-
mation on how to do this.
2. On the camera, push the navigation pad to display the menu system.
3. Use the navigation pad to go to Settings.
4. Push the navigation pad.
5. Select Device settings and push the navigation pad.
6. Select Bluetooth & MeterLink and push the navigation pad.
7. Enable Bluetooth by pushing the navigation pad.
8. Select Scan for Bluetooth devices and push the navigation pad right.
9. When the device is displayed in the list of devices, select it and push the navigation
pad to pair the camera and the device.
Note
•
You can add several devices.
•
You can remove an added device by selecting the device and then selecting Remove.
•
After adding a MeterLink device, such as the FLIR MR77 or FLIR CM78, the result from the meter
will be visible in the measurement result table.
#T559845; r.15722/15722; en-US
19