Log List Search - Santec SanStore 4/8/16LMX User Manual

9.4 Log list search

The logs can be used to search and review a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
. To start the event search, press the
The log list menu pops up, as shown below.
MENU TAB
ALL
SYSTEM
NETWORK
EVENT
VIDEO LOSS
2. Use the up/down buttons [] to go to "Time".
Use the left/right buttons [] to move to the next page.
3. Press the [ENTER] button to start the playback.
Note:
The log lists are saved on the HDD.
_________________________________________________________________________________
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
[LOG] button on the remote control.
All events are listed which occurred ever since the recorded was
initially powered.
It shows all system events.
It shows all network events.
It shows all events except for alarm, motion, video loss and system
failure.
It shows all video loss events.
- 94 -
CONDITION
User manual