Preset And Tour - Santec SanStore 4/8/16LMX User Manual

Control via mouse:
Using the mouse, the PTZ menu and control box are displayed as shown below.
Use the mouse cursor instead of the direction buttons to move around.

8.2 Preset and tour

Button
Set the preset position. Press the [SPOT OUT] button on the remote
control.
a.
b.
c.
d.
e.
Go to the preset position. Press the [INFO] button on remote the control.
a.
b.
Start auto tour. Press the [BACKUP] button on the remote control.
a.
b.
c.
_________________________________________________________________________________
Move the PTZ camera into the desired position.
Press the [Preset] button.
"Custom 1" will illuminate.
Set the number for the preset position.
Press the [ENTER] button to save the presets and to exit the menu.
Press the [Go] button.
Enter the desired preset number and the press the [ENTER] button.
Press the [Auto Tour] button.
Press the [ + ] button and the enter the range of presets.
Press [ENTER] to confirm.
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
Function
- 86 -
User manual