Using Headsets; Enabling Headset Memory Mode - Polycom VVX500 End User Manual

Using Headsets

You can connect an analog and/or USB headset to your phone. If an analog headset is connected,
green. If a USB headset is connected,
headset will be used. If two USB headsets are connected, the headset you connected first will be used.
If you use a headset, you can set up your phone so that all calls use your headset. IF you use a headset that
supports electronic hookswitch (EHS), you can press the hookswitch button to place, answer and end calls. In
addition, you may be able to mute calls and control volume from your headset.

Enabling Headset Memory Mode

This feature is useful for permanent or full-time headset users. You can set up your phone so that all incoming and
outgoing calls use your headset. At any time, you can switch to handset or speakerphone mode.
To use Headset Memory Mode, you must enable, and then activate, Headset Memory Mode.
To enable Headset Memory Mode:
1. Tap Settings from Home view, and tap Basic> Preferences> Headset> Headset Memory
2. From the Headset Memory Mode screen, tap Enabled.
3. Press
4. To activate Headset Memory Mode, press
Now, whenever you answer a call, the call will connect to your headset automatically. If you switch to speakerphone
or the headset, you deactivate Headset Memory Mode. Calls will no longer automatically go to your headset, unless
you choose this mode. To have calls go to your headset again, activate Headset Memory Mode by pressing
twice.
Page | 13
glows blue. If both an analog and USB headset are connected, the USB
twice.
glows