Selecting The Operating Mode; Setting A Frequency - Icom ID-51A Basic Instructions

■ Selecting the operating mode

Operating modes are determined by the modulation of the
radio signals. The transceiver has a total of four operating
modes, AM, FM, FM-N and DV.
Push [MODE] one or more times to select a desired
➥
operating mode.
• The AM mode can be used for only the AIR band (108.000 MHz
to 136.995 MHz).
• When the "GPS TX Mode" item is set, "DV-A" or "DV-G" appears
instead of "DV." (p. 23)
AM mode selected
FM mode selected
FM-N mode selected
DV mode selected

■ Setting a frequency

q When VFO mode is selected, push [V/MHz]
the 1 MHz or 10 MHz Quick Tuning function step, or turn
it OFF.
• When the 1 MHz step is selected, the 1 MHz digit blinks.
• When the 10 MHz step is selected, the 10 MHz digit blinks.
Rotate [DIAL] to select the desired frequency in 1 MHz or
w
10 MHz steps.
When 10 MHz steps are selected, push [V/MHz]
e
cancel the Quick Tuning function.
Blinks
When the frequency
changes in 1 MHz steps.
BASIC OPERATION
to select
Blinks
When the frequency
changes in 10 MHz steps.
4
to
4
34