Icom ID-51A Basic Instructions page 61

Push D-pad( ) to select "Re-
e
peater List," and then push
D-pad(Ent).
Push D-pad( ) to select the
r
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
• Example: "11: Japan"
Push D-pad( ) to select your
t
access repeater, and then
push D-pad(Ent).
• Example: "Hirano"
Repeater area Repeater call sign
Go to step y
D-STAR OPERATION
If the selected repeater name
y
is displayed in "FROM" on the
DR screen, the access re-
peater setting is completed.
NOTE: See page 60 for status indications after a repeater
system reply is received.
For your reference:
You have four other ways to select your access repeater,
other than selecting it from repeater list. See the Advanced
Instructions for more details.
• Rotating [DIAL]
• Searching for the nearest repeaters
• Selecting from the TX History
• Searching for a repeater using the DR scan
• When you select just the repeater name, the repeater call
sign, its frequency, duplex setting, frequency offset and
Gateway call sign are automatically set.
• The repeater list, described in this manual, may differ from
your transceiver's programmed list.
6
Completed
Completed
6
48