Icom ID-51A Basic Instructions page 79

D Reflector Echo Testing
You can transmit a short message, and after releasing [PTT],
your message will be played back. It is a useful check of how
well your signal is getting into the repeater, and you can use it
to verify that your repeater is operating normally.
Hold down for 1 sec-
q
ond.
Push D-pad( ) to select "TO,"
w
and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select
e
"Reflector," and then push D-
pad(Ent).
• The "REFLECTOR" screen ap-
pears.
Push D-pad(
r
"Echo Test."
PushD-pad(Ent).
t
• The transceiver returns to the
• "Echo Test" and "E" are dis-
Hold down [PTT] and speak
y
at normal voice level.
• The TX/RX indicator lights red.
Release [PTT] to hear your
u
message.
Go to step r
D-STAR OPERATION
) to select
DR screen.
played in "TO."
6
6
66