Output Power; Low Output - Icom IC-2SA Instruction Manual

HM SELECTING OUTPUT POWER
Output power can be selected for High and 3 levels of Low
power. Select your desired output power, depending on
your communication distance.
@®SELECTING HIGH OR LOW OUTPUT POWER
1) Push [FUNC] then push the PTT switch.
e''LOW" appears when Low power is selected.
2) Push [FUNC] again, then push the PTT switch.
e High output power is selected. |
BASIC OPERATION 4.
@®SELECTING 1 OF 3 LOW OUTPUT POWER
SETTINGS
ay ei
LOW 2. |LOW amlmpeo
LOW 3 | LOW amgpsoen
HIGH rut tsi [si t7) jo) _|
1) Push [FUNC].
2) Push and hold the PTT switch then rotate the tuning
control.
e The S/RF indicator shows output power selection as
described above.
7