Printing With White Ink And Cmyklclm Ink (Wmt Mode) - Roland VS-540 Manual

Printing with White Ink and CMYKLcLm Ink (WMT Mode)

This section describes how to perform printing with the white ink and CMYKLcLm ink when the printer is in
WMT mode (8 colors of CMYKLcLmWMT). Deciding which ink between the white and the CMYKLcLm you
want to use for the base is an important point in determining the print job setting here. To use the white ink
for printing, you need to use the printing data where the use of the white ink is designated.
 P. 12, "2-3 Creating Printing Data"
Procedure

Make sure that you have finished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").


* The image of overprinting in the sequence of white and CMYKLcLm is the same as that of overprinting in
the sequence of white and metallic silver/CMYK on page 35. (The description of "metallic silver/CMYK" is
to be replaced with "CMYKLcLm" only.)
Double-click .
Queue A Properties" window appears.
Click .
For [Media Type], select "xxx: Clear PET
Film" or "xxx: PET Clear Film, Adhesive."
"xxx" indicates "ESP-CL" and others.
With [Mode], select the print mode.
White -> CMYKLcLm (v)
Inks are overprinted in the sequence of white and
then CMYKLcLm Color.
CMYKLcLm -> White (v)
Inks are overprinted in the sequence of CMYKLcLm
and then white Color.
Chapter 3 Printing
3-1 Print Job Setting
37