Connect The Power Cable And The Network Cable - Roland SOLJET Pro III XC-540 Setup Manual

Wide format printer/cutter
Hide thumbs Also See for SOLJET Pro III XC-540:
Table of Contents

Advertisement

Connect the power cable and the network cable

Do not use with any electrical power supply that does not meet the ratings dis-
WARNING
played on the unit.
Use with any other power supply may lead to fire or electrocution.
WARNING
Ground the unit with the ground wire.
Failure to do so may result in risk of electrocution in the event of a mechanical problem.
WARNING
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Power cord
Pass the cable
through here.
4.Connect the Cables
Ethernet (100Base-TX recommended)
Ethernet cable (Category 5 or higher)
Never insert a telephone cable.
35

Advertisement

Table of Contents
loading

Table of Contents