Table of Contents
Advertisement
Your TV has two separate antenna inputs on the back
(labeled
and
ANT A
ANT
different signal sources if desired. For example, you can
connect a cable-TV system to one input and a home antenna
to the other input.
By pressing the
(antenna) button on the remote control,
ANT
you can switch back and forth between the two signal
sources.
Listed below are some other common uses of the two
antenna inputs:
1 Connecting a cable-TV system (or antenna) to one input and a
VCR to the other.
2 Connecting a cable-TV system (or antenna) to one input and a
video game to the other.
3 Connecting a double-trunk cable system to both inputs.
4 Connecting a cable-TV converter/decoder box that scrambles
only premium channels and cannot be controlled by remote
control. Connection details are on pages 62-63.
Your TV provides two separate channel memories (one for
input and one for
ANT A
ANT
or erase channels into each channel memory scan list. The
channel memory scan list is the list of channel numbers your
TV will stop on when you press the
button.
Autoprogram
When you use the
automatically checks both inputs and sets up a separate
channel memory scan list for each.
Changing Antenna Input
with master remote control
1
(antenna)
Press the
button on the remote control to switch
ANT
from
ANT A
input to
ANT
channel number display on the TV screen to let you know you
are now watching whatever signal is connected to the
connector on the back of the TV.
2 Press the
(antenna) button again to switch back to
A N T
CHANNEL
up or down
function, the TV
Antenna
B
A N T
Signal from ANT B
connector on back of TV.
.
A N T A
Changing Antenna Input
with menus
1
Press
the
button to display the
M E N U
screen. Press the + or -button to highlight Setup.
2 Then press the
button again to display the
M E N U
3 Press the
button to change the
MENU
Antenna: input A
between
and
with the channel number display to let you know you are
watching whatever signal is connected to the
on the back of the TV.
4 When you are finished, press the + or - button to highlight
Done,
and then press the
MENU
menu from the TV screen. The
automatically disappear from the screen if you do not press a
button within a few seconds.
M A I N M E N U
on the TV
SETUP
menu.
Antenna
function
input B. Antenna B
will appear
B
connector
A N T
Signal from ANT B
connector on back of TV.
to
SETUP
button
remove the
SETUP
menu will
Advertisement
Table of Contents
