Interface Settings; Figure 7-109. Dhcp Relay Interface Configuration Page; Table 7-83. Dhcp Relay Interface Configuration Page Parameters - Supermicro SBM-GEM-X2C+ User Manual

Interface Settings

Figure 7-109. DHCP Relay Interface Configuration Page

Clicking the I
NTERFACE
page (Figure 7-109), which allows you to configure the DHCP relay for VLANs. The
parameters for this page are shown in

Table 7-83. DHCP Relay Interface Configuration Page Parameters

Parameter
VLAN Interface
Circuit ID
Remote ID
Chapter 7: Layer 2/3 Ethernet Switch Firmware
C tab brings up the DHCP R
ONF
Table
Description
This parameter specifies the VLAN Interface name.
This parameter specifies the DHCP Relay Circuit identifer.
This parameter specifies the Remote identifer.
7-123
I
ELAY NTERFACE
7-83.
C
ONFIGURATION