Led Indicators; Ports; Table 5-5. Sbm-Gem-X2C(+) 1/10-Gigabit Ethernet Switch Module Features; Table 5-6. Sbm-Gem-X2C(+) Ports - Supermicro SBM-GEM-X2C+ User Manual

Superblade Network Modules User's Manual

Table 5-5. SBM-GEM-X2C(+) 1/10-Gigabit Ethernet Switch Module Features

Feature
Chipset
Internal/External Ports
Bandwidth
Trunking
Jumbo Frame Support
Remote Management
Protocols
Power Consumption
Operating System

LED Indicators

LED indicators for the SBM-GEM-X2C(+) 1/10-Gigabit Ethernet switch module are listed
and described in

Ports

The SBM-GEM-X2C(+) 1/10-Gigabit Ethernet switch module contains several
front-mounted ports as described below in
Port
RS-232 Compatible Serial Port
RJ45 Ethernet Ports
CX4 10-Gbps Ports
SFP+ 10-Gbps Port
Description
Broadcom BCM56314
Internal: Twenty (X2C+) 1-Gbps downlink ports
External: Two 1-Gbps RJ45 uplink ports and Three 10-Gbps uplink ports (1
SPF+, 2 CX4)
112-Gbps non-blocking
Link aggregation support (Full 802.3 ad)
Up to 9KB
Browser-based management or Command Line Interface (CLI)
Spanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, IGMP
snooping and 802.1x
~30.6W
Firmware (see Section 3-4: Firmware for the 1/10 Gigabit and 10-Gigabit
Ethernet Switch Modules on page 3-13
Table B-2 of Appendix

Table 5-6. SBM-GEM-X2C(+) Ports

Description
This port accepts an connector cable for uplink using RS-232
connection to a console.
These two ports accept a RJ45 connector for 1-Gbps uplink
communications.
These two ports accept a CX4 10GBase-CX4 connectors for
10-Gbps uplink communications or for stacking.
This port accepts a SFP+ Direct Attach connector or fiber with SFP+
transceiver for 10-Gbps uplink communications.
for details)
B.
Table 5-6.
5-4