Superblade Network Modules User's Manual
4-5
SBM-IBS-F3616M 4X QDR InfiniBand Switch
Module
Figure 4-4. SBM-IBS-F3616M InfiniBand Switch Module
2
5
8
1
10
Table 4-7. SBM-IBS-F3616M InfiniBand Module Interface
Item
Description
1
System error. Fault LED (Red)
2
System status. Ready LED (Green)
3
External InfiniBand Ports
4
Per Port Dual-color LED, PHY link(Green)/Logic link(Amber)/ACT blinking(Green+Amber)
5
Module Release Handle
6
Internal CMM Module Ethernet Port
7
Port Numbers (First port number is top port, second port number is bottom port)
8
QDR Switch Reset and CMM Load Default
9
KVM Connector
10
CMM Activity LED
a. If the fault LED goes on, the QDR switch operation is stopped. It then needs a hardware
reset or a power off cycle to bring it back into normal operation.
b. If the Green LED is blinking, the QDR switch is overheated. Please check the air fan and
vent condition. If the fault LED goes on at the same time, a hard reset or a power off
cycle needs to be initiated.
7
a
3
4
9
b
4-6
5
6