Sbm-Ibs-Q3618M/Sbm-Ibs-Q3616M 4X Qdr Infiniband Switch Modules; Figure 4-3. Sbm-Ibs-Q3616M Infiniband Switch Module; Table 4-5. Sbm-Ibs-Q3618M/Sbm-Ibs-Q3616M Infiniband Module Interface - Supermicro SBM-GEM-X2C+ User Manual

Superblade Network Modules User's Manual
4-4 SBM-IBS-Q3618M/SBM-IBS-Q3616M 4X QDR
InfiniBand Switch Modules

Figure 4-3. SBM-IBS-Q3616M InfiniBand Switch Module

2 5
8 1 10

Table 4-5. SBM-IBS-Q3618M/SBM-IBS-Q3616M InfiniBand Module Interface

Item Description
1 System error. Fault LED (Red)
2 System status. Ready LED (Green)
3 External InfiniBand Ports (16 QSFP ports for Q3616M and 18 QSFP ports for Q3618M)
4 Per Port Dual-color LED, PHY link(Green)/Logic link(Amber)/ACT blinking(Green+Amber)
5 Module Release Handle
6 Internal CMM Module Ethernet Port
7 Port Numbers (First port number is top port, second port number is bottom port)
8 QDR Switch Reset and CMM Load Default
9 KVM Connector
10 CMM Activity LED
a. If the fault LED goes on, the QDR switch operation is stopped. It then needs a hardware
reset or a power off cycle to bring it back into normal operation.
b. If the Green LED is blinking, the QDR switch is overheated. Please check the air fan and
vent condition. If the fault LED goes on at the same time, a hard reset or a power off
cycle needs to be initiated.
7
a
3
4 9
b
4-4
5
6