Connections For Temperature Compensated Battery Charging Voltage; Introduction - Autronica Autro Safe BS-310 Installation Handbook

Internal Cable Connections
2.8 Connections for Temperature Compensated
Battery Charging Voltage

2.8.1 Introduction

The Power Supply BSS-103A/02 in the Fire Alarm Control Panel BS-
310/320 / Controller BC-320 is provided with a temperature sensor for
temperature compensated battery charging voltage.
The internal connections to the sensor is already done when the
product leaves the factory. The cable with the sensor has to be taped
to the battery cover bracket. If a solution with external battery
connection is used, the temperature sensor must be removed and a
longer cable from an external battery cabinet must be attached to this
connection (refer to next chapter).
AutroSafe cabinet
Fix the temperature sensor to the battery cover bracket with electrical
tape.
Installation Handbook, AutroSafe Interactive Fire Alarm System, Release 3, 116-P-ASAFE-FA/DE,
Rev. J, 2011-12-06,
Autronica Fire and Security AS