● Remove the dust seal ① and piston seal ②.
CAUTION
� Care not to cause scratch on the cylinder bore.
� Do not reuse the piston seal and dust seal that
have been removed.
◉ CALIPER INSPECTION
Inspect the caliper cylinder wall and piston surface for
scratch, corrosion or other damages.
If any abnormal condition is noted, replace the caliper.
◉ CALIPER REASSEMBLY
Reassemble the caliper in the reverse order of disas-
sembly procedures and observe the following points.
CAUTION
� Wash the caliper components with fresh brake
fluid before reassembly. Do not wipe off brake
fluid after washing the components.
� Replace the piston seal and dust seal with new
ones with brake fluid applied.
Brake fluid specification and classification
● Install the brake pad spring.
: DOT 3 or DOT 4
CHASSIS 6-12
②
①