HYOSUNG Aquila 250 Service Manual page 84

● Install the clutch release rack ①, bearing ② and
washer ③.
● Install the clutch pressure plate ④, clutch springs and
clutch spring mounting bolts.
● Hold the primary drive gear nut and tighten the clutch
spring mounting bolts in a crisscross pattern.
NOTE:
Make sure that the clutch pressure plate is installed
correctly.
■ CLUTCH COVER
● Install the two dowel pins and new gasket ⑤.
● Apply engine oil to each gears, bearings and clutch
plates.
● Tighten the clutch cover bolts securely.
②
⑤
ENGINE 3-46
③ ①
④