HYOSUNG Aquila 250 Service Manual page 175

6-47 CHASSIS
● Remove the chain buffer ① from the swingarm.
◉ INSPECTION
� SWINGARM
Inspect the swingarm for damage.
If any defects are found, replace the swingarm with a
new one.
� CHAIN BUFFER
Inspect the chain buffer for wear and damage. If any
defects are found, replace the chain buffer with a new
one.
� SWINGARM PIVOT SHAFT
Measure the pivot shaft runout using the dial gauge. If
the pivot shaft exceeds the service limit, replace it with a
new one.
Swingarm pivot shaft
runout
Dial gauge : 09900 - 20606
Magnetic stand : 09900 - 20701
V-block : 09900 - 21304
Service limit
0.6 mm
①