HYOSUNG Aquila 250 Service Manual page 136

� WHEEL BEARING REMOVAL
● Remove the wheel bearing by using the special tool.
Wheel bearing remover : 09941 - 50111
CAUTION
The removed bearing should be replaced with
new ones
◉ REASSEMBLY
Reassemble the front wheel in the reverse order of
removal and disassembly.
Pay attention to the following points :
� WHEEL BEARING
● Apply SUPER GREASE "A"to the wheel bearings.
SUPER GREASE " A "
● Install the wheel bearings as follows by using the
special tools.
Steering race installer : 09941 - 34513
CAUTION
First install the right wheel bearing, then install
the left wheel bearing.
� BRAKE DISC
Make sure that the brake disc is clean and free of any
greasy matter.
● Apply THREAD LOCK "1324"to the disc mounting
bolts and tighten them to the specified torque.
Brake disc bolt : 18~28 N∙m (1.8 ~2.8 kg∙m)
THREAD LOCK " 1324 "
GREASE
CHASSIS 6-8