HYOSUNG Aquila 250 Service Manual page 158

● Turn the steering stem lower bracket about five or six
times to the left and right.
● Loosen the steering stem nut
NOTE:
This adjustment will vary from motorcycle to motor-
cycle. Make sure that the steering turns smoothly
and easily in both directions without play.
● Install the steering stem upper bracket ① and washer
②.
● Tighten the steering stem head nut temporarily.
● Install the handlebars. (Refer to page 6-17)
● Tighten the handlebar holder nuts to the specified
torque.
Handlebar holder lower nut
: 40~60 N∙m (4.0~6.0 kg∙m)
● Align the upper surface of the front fork inner tube
with the upper surface of the steering stem upper
bracket.
● Tighten the upper front fork clamp bolts to the speci-
fied torque.
Front fork upper clamp bolt
: 22~35 N∙m (2.2~3.5 kg∙m)
● Tighten the steering stem head nut to the specified
torque.
Steering stem head nut
: 80~100 N∙m (8.0~10.0 kg∙m)
¼ ¼ - ½ ½ of a turn �.
①
②
CHASSIS 6-30
�