HYOSUNG Aquila 250 Service Manual page 153

6-25 CHASSIS
● Fit the O-ring to the front fork upper bolt and apply
SUPER GREASE "A" .
SUPER GREASE " A "
CAUTION
Use a new O-ring to prevent oil ieakage.
● Install the front fork to the motocycle.
● Align the upper surface of the inner tube with the
upper surface of the steering stem upper bracket.
● Tighten the front fork lower clamp bolts ① and front
fork upper bolts ② to the specified torque.
● Tighten the front fork upper clamp bolts ③ to the
specified torque.
Front fork upper clamp bolt
: 22~35 N∙m (2.2~3.5 kg∙m)
Front fork lower clamp bolt
: 22~35 N∙m (2.2~3.5 kg∙m)
Front fork upper bolt
: 15~30 N∙m (1.5~3.0 kg∙m)
● Install the front fender and tighten the mounting bolts
temporarily.
● Install the front wheel. (Refer to page 6-8)
● Install the front brake caliper. (Refer to page 6-12)
● Move the front fork up and down several times .
● Tighten the front fender mounting bolts securely.
②
③
①