HYOSUNG Aquila 250 Service Manual page 156

● To remove the lower inner race, use a chisel like.
CAUTION
� Unless corrosion, damage or other abnormal
condition is found, the bearing race need not
be replaced.
� Once the lower inner race has been removed,
replace it with a new one.
● Drive out the steering stem bearing outer races using
the special tools ① and a suitable wedge bar ②.
Bearing outer race remover ① : 09941 - 54911
◉ INSPECTION
Check the steering stem and steering stem head for any
damage.
Check the bearing and race for corrosion, nick or other
damage.
◉ REASSEMBLY
Reassembly can be performed in reverse order of disas-
sembly procedures.
However, operate the work taking care for the following
points.
● Press in the upper and lower outer race using the
special tool.
Steering race installer : 09941 - 34513
②
①
CHASSIS 6-28