Basic Operation - Optiview VR LT Quick Start Up Manual

Please refer to the following sheet for more information.
Serial Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2.3.7

Basic Operation

2.3.7.1 Playback Operation
There are various search modes: video type, channel number or time. The system can max display 128 files
in one screen. You can use page up/down button to view if there are more than one page.
Select the file name and double click mouse (or click enter button) to view file content.
2.3.7.2 Playback Mode
There are two playback modes: 4-ch and all-channel. In 4-ch playback mode, you can select the 1/2/3/4-ch
playback depending on your requirement. In "all-channel" mode, system can playback in full channels.
Please note the 4-ch has no all-channel playback mode.
2.3.7.3 Accurate playback
Input specific time (h/m/s) in the time column and then click playback button, the system will playback
specific date and time based on your input information.
2.3.7.4 Synchronized playback function when playback
During playback process, click numeral key, system can switch to the corresponding channel video of the
same time.
2.3.7.5 Digital zoom
When the system is in full-screen playback mode, press left button of your mouse, hold it and drag your
mouse in the screen to select a section and then left click mouse to activate digital zoom. To exit digital
zoom, right click mouse to exit.
2.3.7.6 File backup
System supports backup operation during search. You can draw a
Then click backup button (Button 14 in Figure 2-13) Fn in one channel, system max displays 32 files.
If you want to clip a period of file, please playback the original file first. Click the
2-13) at the start point (that is your new file beginning point). Drag the file to the end point (that is your new
file end point) and then click the
current new file.
Function
Play
Backward
Stop
Slow play
Fast play
Previous frame
Next frame
Volume
Previous file
Next channel
Next file
Previous channel
Search
Backup
Clip
again. Click the backup button (Button 14 in Figure 2-13) to save your
√
before file names (multiple choices).
(Button 15 in Figure
21