Basic Playback Operation - Optiview H.264 Setup Manual

Dome Camera Control Keys:
1 Set / Go Preset
2 Toggle Hint Screen
3 Enter / Auto
4 ESC

Basic Playback Operation

Searching Recorded Video by Time:
Press SEARCH button to enter the Search menu.
Move the cursor to "From Time" and press ENTER will start playing recorded video from the
specified "From Time".
Move the cursor to "End Time" and press ENTER will start playing recorded video from the
specified "End Time".
Use Direction keys to move the cursor for setting the Start Time; adjusting the date and time
values by UP/DOWN keys. Press ENTER to confirm or ESC to abort.
Move the cursor to <Begin Playback> and press ENTER to start playing back the selected
video. Either press PLAY/STOP again or ESC to return to live video.
NOTE: If there is no available recorded video that matches the specified time and date, the
unit starts to playback from the next available video.
Searching Recorded Video by Event:
Press SEARCH button to enter the Search menu.
To search event video that was recorded on a specific camera, use LEFT/RIGHT keys to move
the cursor and press ENTER to select or de-select a channel.
Move the cursor to <Event List> and press ENTER to list the event video of the selected
channels.
The list displays each event by date, time, triggered camera and alarm type. The latest recorded
event video will be listed on the top. To exit the event list, press ESC.
Use UP/DOWN keys to scroll through the Event List. Press ENTER to play back the selected
event record.
NOTE: The event list displays only the first 1024 events; as some events are deleted, others
are displayed.
6
5 Pan / Tilt
Enter Dome Camera
6
Control Mode
7 Focus Near
8 Focus Far
9 Iris Close
10 Iris Open
11 Zoom Out
12 Zoom In