Sam4s ER-5200M Operator's And Programming Manual page 156

Programming Group Descriptors
154 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 9 1 0, press the SBTL key.
9 1 0
3. Enter the number (1-99) of the group you wish to program; press the X/TIME key.
X/TIME
4. If you are programming using an alpha keyboard overlay, type up to 18 descriptors on
the overlay and press the SBTL key.
Type up to 18
descriptor keys
If you are programming using descriptor codes, enter up to 18 three-character codes and
press the SBTL key.
Enter up to 18 three-
character codes
5. To program additional groups, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
SBTL
SBTL
ER-5200M/5240M Electronic Cash Register