ACPI Suspend Type
This item will set which ACPI suspend type will be used.
S1 (POS)
PM Control by APM
No
Yes
Note :Enable this for O.S. with APM like Windows
Video Off Option
The settings are N/A, Standby, Doze, or Suspend. This option is for
choosing the setting in which the monitor will turn off.
N/A
Doze
Standby
Suspend
The default setting is Standby.
The S1 sleeping state is low wake-up latency
sleeping state. In this state, no system context is
lost(CPU or chip set) and hardware maintains all
system context.
System BIOS will ignore APM when
power managing the system.
System BIOS will wait for APM's
prompt before it enter any PM mode
Always turn on.
During Doze mode, the monitor will be turned
off.
During Standby mode, the monitor will be turned
off.
During Suspend mode, the monitor will be turned
off.
3-23
®
®
®
98, Windows
NT, etc.