Table of Contents
Advertisement
5.2-3 Windows 98
5.2-3-1 Installing Drivers During Windows 98 Installation
The following details the installation of the Ultra100 drivers while
installing Windows 98 (with the Ultra100 controller card already in
place). If you're installing the Ultra100 drivers on a system with
Windows 98 already installed, see "Installing Drivers with Existing
Windows 98."
1.
After installing the Ultra100 controller card and configuring the
hard drive(s), partition and format your hard drive(s), if necessary.
2.
Install Windows 98 normally.
3.
After installation, go the "Start" menu and choose "Settings."
4.
From the "Settings" menu, choose "Control Panel."
5.
In the "Control Panel" window, double-click on the "System"
icon.
6.
In the "System" window, choose the "Device Manager" tab.
7.
In the hierarchical display under "Other Devices" is a listing for
"PCI Mass Storage Controller." Choose it and then press the
"Properties" button.
8.
Choose the "Driver" tab in the "Properties" window, choose
"Update Driver," and then press "Next."
9.
Choose "Search for a better driver than the one your device is
using now (recommended)," then press "Next."
10. Choose "Specify Location," and then type "A:\WIN95-98" in the
text box.
11. Insert the "Ultra100 Driver" diskette into the A: drive.
12. Press the "Next" button. A message informing you that Windows
has found "Win95-98 Promise ULTRA100 (tm) IDE Controller"
should appear.
13. Press "Next," then "Finish," then "Yes" when asked if you want
to restart your computer. Be sure to remove the diskette from
drive A:.
5-7
Hide quick links:
Advertisement
Table of Contents
