Table of Contents
Advertisement
5.2-2 Microsoft Millennium
5.2-2-1 Installing Drivers During Millennium Installation
The following details the installation of the Ultra100 drivers while
installing Microsoft's Millennium (with the Ultra100 controller card
already in place). If you're installing the Ultra100 drivers on a system
with Millennium already installed, see "Installing Drivers with
Existing Millennium System."
1.
Install Microsoft Millenium fully.
2.
After installation, go the "Start" menu and choose "Settings."
3.
From the "Settings" menu, choose "Control Panel."
4.
In the "Control Panel" window, double-click on the "System"
icon.
5.
In the "System" window, choose the "Device Manager" tab.
6.
In the hierarchical display under "Other Devices" is a listing for
"PCI Mass Storage Controller." Choose it and then press the
"Properties" button.
7.
Choose the "Driver" tab in the "Properties" window, choose
"Update Driver," and then press "Next."
8.
Choose "Search for a better driver than the one your device is
using now (recommended)," then press "Next."
9.
Choose "Specify Location," then type "A:\WINMILL" in the text
box.
10. Insert the "Ultra100 Driver" diskette into the A: drive.
11. Press the "Next" button. A message informing you that Millen-
nium has found "Windows Millennium Promise ULTRA100 (tm)
IDE Controller" should appear.
12. Press "Next," then "Finish," then "Yes" when asked if you want
to restart your computer. Be sure to remove the diskette from
drive A:.
5-5
Hide quick links:
Advertisement
Table of Contents
