Video Off Method; Modem Use Irq - MSI 694D PRO Manual

Video Off Method

This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
Blank Screen
DPMS (default)

Modem Use IRQ

This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the
system to enter the Soft-Off state. The settings are: Delay 4 Sec, Instant-Off.
State After Power Failure
This option will determine how the system will power on after a
power failure.
LED In Suspend
This item determines which state the Power LED will use. The
settings are Blink, Dual color, and Single color.
Blink
Dual Color
Single Color
(default)
This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video
buffer.
Initial display power management signaling.
Power LED will blink when the system enters the
suspend mode.
Power LED will change its color when the system
enters the suspend mode.
Power LED will always remain lit.
3-24
®