Table of Contents
Advertisement
This section details the Ultra100 driver installation procedure when
used with various operating systems as follows:
· Windows 2000
· Microsoft Millenium
· Windows 98
· Windows NT 4.x
You can install from CDROM drive or copy it to disk from CDROM.
5.2-1 Windows 2000
5.2-1-1 Installing Driver during New Windows 2000 Installation
1a. Floppy Install: Boot the computer with the Windows 2000 installa-
tion diskettes.
1b. Floppyless Install: Boot from floppy and type "WINNT". After
files have been copied, the system will reboot. On the reboot, press
<F6> after the message "Setup is inspecting your computer's hard-
ware configuration..." appears.
1c. CD-ROM Install: Boot from the CD-ROM. Press <F6> after the
message "Press F6 if you need to install third party SCSI or
RAID driver" appears.
2.
When the "Windows 2000 Setup" window is generated, press
"S" to Specify an Additional Device(s)
3.
Press "O" to select "Other" and press the "Enter" key.
4.
Insert the Promise Technology driver diskette into drive A: and
press "Enter" key.
5.
Choose "Win2000 Promise Ultra100 Controller" from the list that
appears on screen, then press the "Enter" key.
6.
The Windows 2000 Setup screen will appear again saying "Setup
5-2
Hide quick links:
Advertisement
Table of Contents
