Acpi Suspend Type; Video Off Method - MSI MS-6189 Manual

CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3

ACPI Suspend Type

This item will set which ACPI suspend type will be used.
S1 (POS)
The S1 sleeping state is low wake-up latency sleeping state. In this
state, no system context is lost(CPU or chip set) and hardware
maintains all system context.
S3 (STR)
The S3 state is a low wake-up latency sleeping state where all system
context is lost except system memory. CPU, cache, and chipset
context are lost in this state. Hardware maintains memory context and
restores some CPU and L2 configuration context.
Video Off Optiom
When enabled, this feature allows the VGA adapter to operate in a power
saving mode.
Always On
Suspend Off
→
Susp, Stby Off
→
All modes Off
→

Video Off Method

This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
Blank Screen
DPMS Supported (default) Initial display power management signaling.
Monitor will remain on during power saving
modes.
Monitor will blanked when the systems enters
the Suspend mode.
Monitor will blanked when the systems enters
either Suspend or Standby modes.
Monitor will blanked when the system enters
any power saving mode.
This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video
buffer.
3-24
AWARD AWARD AWARD AWARD AWARD BIOS SETUP BIOS SETUP BIOS SETUP BIOS SETUP BIOS SETUP
®