Using The Webcam Interface - FLIR Voyager III Operator's Manual

Hide thumbs Also See for Voyager III:

Table of Contents

Voyager III Webcam Interface

Display the Webcam Home Page

Once the PC is connected to the bulkhead box, using Internet Explorer version 8

or higher, enter the following in the browser address field (the port number 8082

is required):

http://192.168.250.116:8082/WebControl.html

The webcam control page will display.

Note: If the VLC player application is not already installed on your PC or your

browser security settings are set to prevent ActiveX controls from running, you

will see various messages displayed at the top of the screen. VLC must be

installed as a separate step before you begin. See "Installing the VLC Player" on

page 69 for details. Even when VLC is installed, you may still need to click the

message to allow ActiveX controls when prompted.

Using the Webcam Interface

The webcam control screen looks like the following figure.

If you see an ActiveX warning, right click the message and choose the option to

install the ActiveX control. It may take a moment for the video to start streaming.

432-0005-00-10 Rev 100 — Voyager III Operator's Manual

Table of Contents