Table of Contents
Advertisement
Voyager III Joystick Control Unit
Display JCU IP Address
If you press the COLOR button while pushing the puck in, the IP address on the
JCU displays on the JCU screen.
Button Summary
Table 2.1 summarizes the action of each button on the JCU and indicates how the
button is affected when tracking or firefighter mode are being used.
TABLE 2.1
Button
COLOR Short
COLOR Long
DIM Short
DIM Long
HOME Short
HOME Long
MENU Short
MENU Long
SCENE Short
SCENE Long
USER Short
USER Long
JCU Puck
The JCU puck functions like a joystick. It can be moved left or right or fore and aft
and it can be rotated in either direction. It can also be pushed in (like a mouse
click) or pulled out. It is used to move the pan/tilt position of the camera, change
the focus, and zoom in and out.
432-0005-00-10 Rev 100 — Voyager III Operator's Manual
Summary of Button Actions
Action
Cycle through thermal color
options
Calibrate thermal cameras
Change JCU illumination
level
Display Power Menu
Return to Home position
Set Home value
Display or exit menus
No Effect
Cycle through preset scenes
Alternate visible and thermal
cameras
Invert Video Polarity (can be
reprogrammed)
Display User Programmable
Button Menu (can be
reprogrammed)
Tracking
Firefighter Mode
Disabled
Disabled
With joystick, control
tracking algorithms
and acquisition
region size and
tracking gate offset
Alternate primary
Invert Video
display between
Polarity disabled
OSD and analog
Initiate tracking or
return to normal or
firefighter mode
19
Advertisement
Table of Contents
