Setting The T2 Time-Out Time; Setting The Ta Time-Out Time; Setting The Tb1 Time-Out Time; Setting The Tb2 Time-Out Time - Kyocera FaxSystem(M) Service Manual

Maintenance
item No.

Setting the T2 time-out time

U641
The T2 time-out time decides the following.
(cont.)
From CFR signal output to image data reception
From image data reception to the next signal reception
In ECM, from RNR signal detection to the next signal reception
1. Change the setting using the +/- keys.
Description
T2 time-out time
2. Press the start key. The value is set.

Setting the Ta time-out time

In the fax/telephone auto select mode, sets the time to continue ringing an operator through the connected
telephone after receiving a call as a fax machine (see figure 1-3-1). A fax signal is received within the Ta set
time, or the fax mode is selected automatically when the time elapses. In fax/telephone auto select mode,
change the setting when fax reception is unsuccessful or a telephone fails to receive a call.
1. Change the setting using the +/- keys.
Description
Ta time-out time
2. Press the start key. The value is set.

Setting the Tb1 time-out time

In the fax/telephone auto select mode, sets the time to start sending the ring back tone after receiving a call as
a fax machine (see figure 1-3-1). In fax/telephone auto select mode, change the setting when fax reception is
unsuccessful or a telephone fails to receive a call.
1. Change the setting using the +/- keys.
Description
Tb1 time-out time
2. Press the start key. The value is set.

Setting the Tb2 time-out time

In the fax/telephone auto select mode, sets the time to start ringing an operator through the connected tele-
phone after receiving a call as a fax machine (see figure 1-3-1). In the fax/telephone auto select mode,
change the setting when fax reception is unsuccessful or a telephone fails to receive a call.
1. Change the setting using the +/- keys.
Description
Tb2 time-out time
2. Press the start key. The value is set.
Description
Setting range Initial setting
1 to 255 69
Setting range
1 to 255
Tb1
Tb2
Figure 1-3-1 Ta/Tb1/Tb2 time-out time
Setting range Initial setting
1 to 255 20
Setting range Initial setting
1 to 255 80
Change in value per step
100 ms
Initial setting
30
Ta
Change in value per step
100 ms
Change in value per step
100 ms
3KH-2
1-3-19