U633 Setting Communication Control; Enabling/Disabling V.34 Communication; Setting The V.34 Symbol Speed (3429 Hz); Setting The Number Of Times Of Dis Signal Reception - Kyocera FaxSystem(M) Service Manual

3KH-2
Maintenance
item No.
Setting communication control 4
U633
Description
Makes settings for fax transmission regarding the communication.
Purpose
To reduce transmission errors when a low quality line is used.
Start
1. Press the start key.
2. Select the item to be set.
Display
V.34
V.34-3429Hz
DIS 2RES
RTN CHECK
The screen changes to the submenu for making settings.
The port that is addressed by U698 is displayed when the optional dual FAX is installed.
The current settings are highlighted. If the optional dual FAX has been installed and if U698 is set to
[ALL] and settings for ports 1 and 2 are not identical, the display is not highlighted.

Enabling/disabling V.34 communication

Sets whether V.34 communication is enabled/disabled for transmission and reception.
1. Select the setting.
Display
ON
TX
RX
OFF
2. Press the start key. The setting is set.

Setting the V.34 symbol speed (3429 Hz)

Sets if the V.34 symbol speed 3429 Hz is used.
1. Select the setting.
Display
ON
OFF
2. Press the start key. The setting is set.

Setting the number of times of DIS signal reception

Sets the number of times to receive the DIS signal to once or twice. Used as one of the correction measures
for transmission errors and other problems.
1. Select the setting.
Display
ONCE
TWICE
2. Press the start key. The setting is set.

Setting the reference for RTN signal output

Sets the error line rate as the reference for RTN signal output. If transmission errors occur frequently due to
the quality of the line, they can be reduced by lowering this setting.
1. Select the setting.
Display
5%
10%
15%
20%
2. Press the start key. The setting is set.
1-3-16
Description
Description
Enables or disables V.34 communication.
Sets the V.34 symbol speed (3429 Hz).
Sets the number of times of DIS signal reception.
Sets the reference for RTN signal output.
Description
V.34 communication is enabled for both transmission and reception.
V.34 communication is enabled for transmission only.
V.34 communication is enabled for reception only.
V.34 communication is disabled for both transmission and reception.
Description
V.34 symbol speed 3429 Hz is used.
V.34 symbol speed 3429 Hz is not used.
Description
Responds to the first signal.
Responds to the second signal.
Description
Error line rate of 5%
Error line rate of 10%
Error line rate of 15%
Error line rate of 20%